67 backup light switch mounting - NCRS Discussion Boards

67 backup light switch mounting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scott Marzahl

    67 backup light switch mounting

    What do the two screws/bolts that hold the B/U light switch supposed to look like, are they phillips machine screws or hex head screws?
    Thanks.
  • Terry F.
    Expired
    • September 30, 1992
    • 2061

    #2
    Re: 67 backup light switch mounting

    I believe they are small hex heads. As I recall the heads were slightly recessed and were stamped with a letter or character. Been a while since I looked under there. Terry

    Comment

    • Wayne M.
      Expired
      • March 1, 1980
      • 6414

      #3
      Re: 67 backup light switch mounting

      Scott -- I'm looking at two switch/bracket/shield assy's I have; they both have the recessed hex head bolts/screws, as Terry mentions. Also both have star washers (captive, it appears). The switch from my late '65 has R_B_W at 120 degree spacing. The other (not sure of year) have a large "M" in the center, with a slightly taller "I" through the center of the "M".

      Comment

      • Terry F.
        Expired
        • September 30, 1992
        • 2061

        #4
        Re: 67 backup light switch mounting

        Both head designs are more than likely correct since GM sourced from more than one supplier for fasteners. Thanks, Terry

        Comment

        • Scott Marzahl

          #5
          Thahnks for the help Wayne and Terry

          Thanks for the help Wayne and Terry, and good meeting you Wayne.

          Scott

          Comment

          • Terry F.
            Expired
            • September 30, 1992
            • 2061

            #6
            Re: Thahnks for the help Wayne and Terry

            I believe Paragon will have those screws.

            You are welcome, Terry

            Comment

            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"