60 Wiring Routing - NCRS Discussion Boards

60 Wiring Routing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John M.
    Expired
    • January 1, 1999
    • 1553

    60 Wiring Routing

    Can anyone help me with the routing of the wiring harness from the fuseblock to the dash? The AIM shows the harness running over to the door hinge area then under the brace to the backside of the dash but when routed in this manner the wires to the stoplamp switch are way short of reaching the switch. The only paths that look proper are to the inside of the emerg. brake and then under the brace and up to the clips at the windshield base or above the upper brace between the brace and the fiberglass of the cowl. The harness is a Lectric Ltd. repro but appears to be exactly the same as the original. All comments would be appreciated. TIA
  • Mark L.
    Expired
    • January 1, 1996
    • 121

    #2
    Re: 60 Wiring Routing

    John, I'm hesitant to respond to this just working from memory, I have pictures from my '58 when I took it apart in '95, I'll look tonight. Anyway your post rings a bell with me I'm pretty sure the harness was inboard of the e-brake shaft. E-mail me off-line if you want to look at the pics.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"