C3... PCV T- fitting - NCRS Discussion Boards

C3... PCV T- fitting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bruce11495

    C3... PCV T- fitting

    I need the "T" fitting, 3/8" on all three outlets, goes on the PCV from the carb to the charcoal cannister. Is it available from the aftermarket? It's on a 72 LT1, located on the drivers side of the engine. I can't find it anywhere in Canada...............TIA
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: C3... PCV T- fitting

    bruce----

    The tee was GM #3970076. It was discontinued a few years ago and I don't think that there is a supercession for it. Dr. Rebuild has available the complete hose kit, including tee. I don't know if they sell the tee seperately, though.
    In Appreciation of John Hinckley

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"