I would appreciate recommendations on how to get rid of alternator noise in my radio. I "drive" a 67 small block coupe. I removed the original headers and installed tuned headers. Naturally, I can't re-install the ignition covers.
-
-
Re: radio interference
There are several things on the car that contribute to the noise supression of the radio. Are all the capacitors in and working properly. Are all the ground wires installed. With the headers you cannot install the side shields, are the lower shields and the top shield in place. If all these items are correct then I have no other suggestions. -
Re: radio interference
All the capacitors and ground straps are installed. The top shield and the shields from the top shield down to the location of the side shields are installed.Comment
-
Re: radio interference
since you installed headers, I am guessing you have resistance wires and plugs. If you can put an hei ignition in as well, it will help. the wires and plugs should cure most of it.Comment
-
Re: radio interference
Since you have headers and are not concerned about originality, maybe you could try some Big Block plug wires with the metal jacket and ground clips.Comment
-
Re: radio interference
That's a thought.Comment
Comment