Distributor-is it OEM? - NCRS Discussion Boards

Distributor-is it OEM?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Richard Hayes

    Distributor-is it OEM?

    I was going through a friend of mine's attic. He pulled out what looks to be a factory dual point tach drive. The cast number on it is 46I or 461. On the side of the housing there is a little flap-exposing a round hole underneath the breakerplate. The tags# are "1110985" and the date looks to be "0 F 10." Does anyone know what this is off of-or was it an over the counter part?

    THANKS-

    Richard
  • Mike E.
    Extremely Frequent Poster
    • February 28, 1975
    • 5134

    #2
    Re: Distributor-is it OEM?

    correct for a 1962 340-horse car, bought over the counter in 1970, 1980, or 1990. A very long run of these was done--loved by many hot-rodders because of the dual points. Average price on ebay is $120-140, depending on condition and whether or not the dual-point cap is with it. Often has wear and has taken out the teeth on either the main shaft or the cross shaft gear.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"