Midyear Dash Removal - NCRS Discussion Boards

Midyear Dash Removal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dean

    Midyear Dash Removal

    With nothing but the dash shell and pads remaining, how do you remove the dash? It appears, in addition to the bolts under the windshield, five rivets on each side (door jam area) must be drilled out. How is the center section attached to the transmission tunnel area? Any information or helpful hints on the removal and installation of the dash would be greatly appreciated!
  • Kenneth S.
    Expired
    • July 31, 1981
    • 302

    #2
    Re: Midyear Dash Removal

    The bottom center of the dash is bonded to the transmission tunnel. Use a sharp chisel and very carefully break the bond so as not to ruin the dash.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"