C3 (72) Should Belt removal - NCRS Discussion Boards

C3 (72) Should Belt removal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe S.
    Expired
    • July 31, 1999
    • 319

    C3 (72) Should Belt removal

    I have teh seats out of my 72 and the belt dangling from the retracter. IS there some easy way to get the belt through the seat? The rubber that prevents it from going back would be a tight squeeze through the hole. I am redoing the seats and the belts and need to separate them.

    Thanks
  • Joe S.
    Expired
    • July 31, 1999
    • 319

    #2
    Re: C3 (72) "Shoulder" Belt removal!! *NM*

    Comment

    • Warren F.
      Expired
      • December 1, 1987
      • 1516

      #3
      Re: C3 (72) Should Belt removal

      Joe:

      The plastic cover should be gently heated up with a hair blower, until warm to the touch, then remove it from the metal buckle end and push the shoulder belt thru the slot in the seat back.

      Comment

      • Joe S.
        Expired
        • July 31, 1999
        • 319

        #4
        Re: C3 (72) Should Belt removal

        Too easy. Took about 1 minute with a heat gun. Thanks!

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"