C-1 Jack Handles - NCRS Discussion Boards

C-1 Jack Handles

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Richard T.
    Very Frequent User
    • February 1, 1979
    • 858

    C-1 Jack Handles

    I'm trying to determine if original 53 to 62 jack handles were marked by the manufacturer. I was looking at the GM drawing in an old issue of the Restorer or Straight Talk (SACE)which was provided by Noland Adams I believe. The drawing clearly states that the manufacturer should mark (stamp) the part with his logo. I was told that originals are stamped with an "A" on the straight section near the tip. Any members with known originals care to comment. This may be an urban legand but I thought I'd check it out. Rich # 2276
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"