C1 Side Window - NCRS Discussion Boards

C1 Side Window

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Allen W.
    Expired
    • September 30, 2000
    • 106

    C1 Side Window

    I need some help. I am trying to adjust my drivers side window on my 56. I have the glass out so i can rebuild some things. While I am at it I want to install the doors glass seal I bought some time ago. My existing glass has no traces of the old seal. Looking at the 57 AIMS and the Paragon and Corvette Central catalogs I'm having a hard time seeing where this seal goes. ST 12 is no help. Does this seal go between the glass and the metal sash? There is some rubber there but no traces of the portions of seal. If I am correct I guess the wide rubber "trough" goes toward the outside door skin side. Is an adhesive used. If my guess is wrong please help.
    Allen
  • Dennis C.
    NCRS Past Judging Chairman
    • January 1, 1984
    • 2409

    #2
    Allen, I believe...

    ...you have it pretty well figured out. No adhesive required. Everything is a tight enough fit as is. Good luck... Dennis

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"