C3 - 350 lifters - NCRS Discussion Boards

C3 - 350 lifters

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim Callan

    C3 - 350 lifters

    When I installed new lifters... I forgot to "squirt" oil in them. Will I be able to set the preload on the lifters ? I know they'll be noisey on start up but the pre-lube should help. Do I need to re-do this step ?

    Thanks

    Jim Callan
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    Re: C3 - 350 lifters

    if you are talking about hyd lifters you are better off no filling them with oil before setting preload because sometime with oil in them the pushrod cup will not depress. just use a drill driven oil pump primer and you will be OK

    Comment

    • Jim Callan

      #3
      Thanks Clem - just what I wanted to hear !! *NM*

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"