Value of 59 Vette - NCRS Discussion Boards

Value of 59 Vette

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scott wakeling

    Value of 59 Vette

    Friend of mine wants to part with his 59 Vette. The car is very original but needs total restoration (sitting in garage for 30 yrs). Looks like the car is an old fulie car(not sure). Engine pad is stamped III22D, block casting says 3756519. Car is a 4-speed, has wonderbar, washers, aluminum raditor, clutch fan, hard & softops. Car also looks very straight. can someone tell me if this engine is original. Missing is FI unit and manifold or carburators, grill, and wheel covers. Any help would be appricated.
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: Value of 59 Vette

    The single-character "D" suffix on the pad indicates a '58-'64 2-barrel 283 from a Powerglide passenger car.

    Comment

    • Verle R.
      Extremely Frequent Poster
      • March 1, 1989
      • 1163

      #3
      Re: Value of 59 Vette

      Scott,

      I know of a widow with a 59 for sale.

      Engine is 60 truck 283.
      Rough paint
      rough chrome/trim
      rough interior
      missing VIN tag

      Asking $40K for a $15K car.

      Take some time and look at the car very closely.
      Unless you can verify it is something special ( FI car, 270 HP... ), it is not worth a great deal. It costs a great deal to restore an "old car" into an NCRS top flight Corvette.

      Verle

      Comment

      • Ed Jennings

        #4
        Re: Value of 59 Vette

        Regardless of the current engine, if the car is an original fuelie there will likely be tell tales of the FI installation. Start by looking at the left inner fender for a nut plate to mount the FI air cleaner. If that is present, the windshield washer, if so equipped, should be on the right near the battery. If all this checks out, post back and we can discuss some of the finer details.

        Comment

        • scott wakeling

          #5
          Re: Value of 59 Vette

          Ed,
          I dont remember seeing any mounting brackets on the Drivers fender well, I'll have to look again. The car does have a high horse tach, Large groment in lower center of firewall for distributer tach drive, Aluminun radiator. Left air hose outlet is open at radiator support. Funny thing pro-team looked at car and offered him 17,500.00 for it...All body panels look good and straight looks like a no hit car..But still needs a total restoration.

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"