Need to know length of '66 tach cable - NCRS Discussion Boards

Need to know length of '66 tach cable

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary B.
    Extremely Frequent Poster
    • February 1, 1997
    • 6979

    Need to know length of '66 tach cable

    Does anyone have their original tach cable removed from their '66 who can tell me the length of the cable housing and the length of the inside cable?

    Thanks,

    Gary
  • Randy S.
    Expired
    • January 1, 2003
    • 586

    #2
    Re: Need to know length of '66 tach cable

    I bought the Paragon 27" unit and I felt it was too long, it kinked up under the dash. I replaced it with my original which I recall is 25 ". Check the archives around January 05, I recall someone advising me the length of their original tach cable as 25 3/4".

    Randy

    Comment

    • Wayne M.
      Expired
      • March 1, 1980
      • 6414

      #3
      The '66 P & A 30 shows shaft 23", cable 24-1/8"

      under part # 3866126, applicable '63 thru '67. You may already know that. I've heard complaints that repro cables are too long. (even more-so for speedo cables). Sorry I'm not prepared to pull my sppedo to measure.

      Comment

      • Gary B.
        Extremely Frequent Poster
        • February 1, 1997
        • 6979

        #4
        Thanks guys. *NM*

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"