C2 part #s, pulleys, starter, distributor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill Farmer

    #1

    C2 part #s, pulleys, starter, distributor

    Hello everyone, as some of you may know from my earlier posts, I am moving to Germany in April. Well, I am trying to get my car put back together asap. I visited my parts the other day at the engine builders and wrote down some #s. Someone tell me if these are correct, as I am trying to replace as much wrong stuff before I leave.

    pulley 3906656
    pulley 3903644 DB
    starter relay 951 D9-5
    starter 1107365 6 E 16 Delco Remy 2BA
    distributor 1111093 Delco Remy 6 C 21

    I have a 66 L72. Thank you all for your help Bill#44207
  • William C.
    NCRS Past President
    • June 1, 1975
    • 6037

    #2
    Re: C2 part #s, pulleys, starter, distributor

    Pulley 3906656-66 427 water pump
    Pulley 3903644 -66-70 427/454 not SHP, but may be service replacement

    Starter sol-sounds correct, starting motor and dist both look correct based on the dates and the part numbers are correct.
    Bill Clupper #618

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 42936

      #3
      Re: C2 part #s, pulleys, starter, distributor

      Bill-----

      The GM #3906656 and GM #3903644 are not likely to be the original pullies used for your car. These are 1967 pullies that later became SERVICE for 1966. If your car were a VERY LATE 1966, then I'd say it's POSSIBLE that these were original. However, I doubt it.
      In Appreciation of John Hinckley

      Comment

      • Bill Farmer

        #4
        Re: C2 part #s, pulleys, starter, distributor

        Joe, my car was born in late May 66. Is that late enough?

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 42936

          #5
          Re: C2 part #s, pulleys, starter, distributor

          Bill-----

          I sort of doubt it, but I would not rule it out completely.
          In Appreciation of John Hinckley

          Comment

          • Bill Farmer

            #6
            Re: C2 part #s, pulleys, starter, distributor

            Thanks Joe. The water pump is a replacement but the power steering pump is original. I guess I have a 50/50 shot. Thanks again. Bill

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"