C2 Dash - NCRS Discussion Boards

C2 Dash

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Clark D.
    Expired
    • August 31, 2004
    • 50
    #1

    C2 Dash

    I am in the process of replacing the dash pads in my 1966 coupe. Upon disassembly I have found the bottom of the dash (fiberglass at floor) has come loose at it's orginal bonding. Short of ordering bonding material is there another subsitute that is very strong? I appreciate the feedback. Clark #42490.
    Tags: None
      • Top
    • ken edmunds
      #2
      Re: C2 Dash

      Use any good two part epoxy to bond it.
        • Top

        Comment

        • Bill Stephenson
          #3
          Re: C2 Dash

          ------If the epoxy stumps you , you can get a screw through both pieces low enough to not be spotted after the console is re-installed. I actually usually do both just so there will still be a connection even if the bond doesnt take.......Bill S
            • Top

            Comment

            Previous template Next
            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"