Oil Tube Cap GASKET - NCRS Discussion Boards

Oil Tube Cap GASKET

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Lane Ockerman
    #1

    Oil Tube Cap GASKET

    On my 65' 327 / 365, I have a GASKET in my oil tube filler cap that is approximately 1/8 inch thick, with a quarter size hole in the middle.

    Question.....
    What was the original thickness of this cork gasket ??
    Mostly just curious.....AIM does not specify.

    Thanks,
    Lane
    Tags: None
      • Top
    • Page C.
      Very Frequent User
      • February 1, 1979
      • 802
      #2
      Re: Oil Tube Cap GASKET

      Hi Lane,
      I think the 1/8 is correct for the thicknest of the cork gasket but the known originals I have seen are solid in the center.
      Page Campbell
        • Top

        Comment

        • Duke W.
          Beyond Control Poster
          • January 1, 1993
          • 15610
          #3
          Re: Oil Tube Cap GASKET

          The original gasket on my cap had a hole in the center.

          Duke
            • Top

            Comment

            • Duke W.
              Beyond Control Poster
              • January 1, 1993
              • 15610
              #4
              PS...

              ...as did the service replacements I bought from GMPD.

              Duke
                • Top

                Comment

                • Eugene B.
                  Very Frequent User
                  • May 31, 1988
                  • 710
                  #5
                  Re: Oil Tube Cap GASKET

                  Gents,
                  As another data point, the 1/8 inch thick, cork gasket that was used on my '65, 327/250 does not have a hole in the center.

                  Regards,
                  Gene
                    • Top

                    Comment

                    • mike mccagh
                      #6
                      Re: Oil Tube Cap GASKET

                      all original cork seals i've seen were donut shaped. mike
                        • Top

                        Comment

                        Previous template Next
                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"