1957 Trunk Lock

[Edward L.]

I would very much appreciate any tips on how to install the trunk lock retainer considering the very limited amount of space available.

While I have installed a number of these in the past, I do remember it took a hell of a long time and plain blind luck.

Any feed back is welcome.

Thanks

[Calvin M.]

Re: 1957 Trunk Lock

Hi Ed -

This "simple" item took a lot of trail and error. I wound up slightly bending the retaining clip and lubricating it's edges so it would slide into place more easily. As I recall, I then used long needle-nose pliers to get the clip in the start position, and then tapped it home with a 3/8" extension about 6" long. That was several years ago and the lock has been solid and tight ever since.

Good luck,
Cal

[Tom P.]

Re: 1957 Trunk Lock

Ed,
Your first impression was correct. It's just a plain pain!

[Joseph T.]

Re: 1957 Trunk Lock

Tom..what is more difficult?

* installing the trunk Lock
* Installing a 53-55 convertible top
* installing the clutch helper spring

These are enough to make one quit!

Who engineered these things?

Joe

[Dennis C.]

Biggest PITA, Top, Spring, Lock, In That Order... *NM*

[mike mccagh]

Re: Biggest PITA, Top, Spring, Lock, In That Order

replacing plexiglass in a c-1 hardtop has to rank right up there with #1 PITA. mikie

[Dennis C.]

M/M - Yeah, you got that one right...!!! *NM*