'67 Upper Steering Column Assembling - NCRS Discussion Boards

'67 Upper Steering Column Assembling

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scott Marzahl

    '67 Upper Steering Column Assembling

    I forgot how I took this apart and the shop manual isn't helping me either.
    I have the upper steering bearing and housing installed, then I believe the snap ring goes on the steering shaft which secures this in place. Then I think this is followed by the cupped washed, cup side down, then the spring washer.
    Can anyone confirm or please correct me.

    Thanks,
    Scott
  • Scott Marzahl

    #2
    Crisis Solved

    I found my sketch from when I disassembled the column. The sequence should be upper bearing assembly, spring washer, flat thrust washer and C clip.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"