68 people, let me know about your actuator boots.

[Terry F.]

Hi, just needing to know if there are screw holes in your actuator flange or the actuator support bracket flange for the wiper door. Then let me know the build date of car. I am also looking for original pictures of 68 wiper door actuator and boot. Thanks, Terry

[Wayne W.]

Re: 68 people, let me know about your actuator boo

I took a picture of 20746 about 15 years ago at Carlisle. The boot was gone but it had no sign of the screws.

[Terry F.]

Re: 68 people, let me know about your actuator boo

I assume no screw holes either? Thanks for the feedback, Terry

[Wayne W.]

Re: 68 people, let me know about your actuator boo

Yep, thats what I ment.

[Terry F.]

Re: 68 people, let me know about your actuator boo

I am guessing it was a June or July car. Thanks, I have started to write all these dates down. I have this feeling that there was probably a dealer tech bulletin that came out in regard to this. That would be nice to have. I am sure they addressed a sollution to the problems people were having with this boot falling out of place. Thanks again, Terry

[Myron Sleeva]

Re: 68 people, let me know about your actuator boo

Terry,

My 69 is a February 4 production and it has the large cannister WITH a hole and also one in the bracket for mounting the boot. Have the original boot. (Have had the car since November of 1970)

[Terry F.]

Re: 68 people, let me know about your actuator boo

Ok, that helps. At least I know that the 68 style boot was used through production and eventually the screw holes appeared either in late 68 or early 69. Any chance you can send me a vin. My email is tfringo@aol.com. Thanks, Terry

[Myron Sleeva]

You got mail. *NM*