BB Intake Gaskets - NCRS Discussion Boards

BB Intake Gaskets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Greg L.
    Extremely Frequent Poster
    • March 1, 2006
    • 2291

    BB Intake Gaskets

    I remember reading someplace about the configuration of replacement SB intake gaskets being different than the originals and was wondering if this is also the case for the 427 intake gaskets? If it is, where could I find correct intake gaskets? I've seen them for the SB's but not the BB's. Thanks again.
  • Rich Puleo

    #2
    Re: BB Intake Gaskets

    I've always relied on Long Island Corvette Supply, licorvette.com
    Check them out.
    Rich

    Comment

    • Stephen L.
      Extremely Frequent Poster
      • May 31, 1984
      • 3148

      #3
      Re: BB Intake Gaskets

      I made my own intake gaskets using a set from NAPA and then cutting them to look like the picture in the Service manual. If you send me an e-mail I'll fire off a photo of the before/after and a set of no-show gaskets that are incorrect for a BB. There is some gasket showing on a BB where the exhaust cross over is.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"