If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You must be an NCRS member
before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below.
I need some help!
My fuse blew on the fuse block, which is for my heater.
I turned on my heater switch, but the blower didn't work on low, med, but on high the fan worked and then after 5 seconds the fuse blew.
Anybody have any suggestions of what's wrong.
Ken your fan motor working on HI and not on the lower speeds because the fuse was blown indicates to me that you have an air conditioned C3. The lower speed fuse is of course in the fuse block, but the high speed fuse is separate and is located in a fuse holder. On my 70 it is located between the brake master cylinder and the fender. The power end connects to the horn relay and the wire is a red heavy guage wire. The end that twists out of the fuse holder retaining the fuse is an orange wire.
Hi Jim,
I don't have an a/c car, and the fan wouldn't work on low or med. speed but on high it worked for 5 seconds and then the fuse blew that is in the block.
We use cookies to deliver our services, and to analyze site activity. We do not share or sell any personal information about our users. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment