1963 SWC Measurement - NCRS Discussion Boards

1963 SWC Measurement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ray C.
    Extremely Frequent Poster
    • June 30, 2001
    • 1132

    1963 SWC Measurement

    Could some one please provide a measurement (approximate) for a 1963 SWC. I would like to know the clearance between the frame end rail cap (just below the body mount access panel, kick-up) and the fiberglass inner fender flap that is to the rear of this area.

    Thanks for any help!

    Ray #36314
    Ray Carney
    1961 Sateen Silver 270-HP
    1961 Fawn Beige 315-HP
  • Joe M.
    Very Frequent User
    • February 1, 2005
    • 589

    #2
    Re: 1963 SWC Measurement

    Ray,
    Approximately 1" from the rail end cap to the front inside of the fiberglass panel. Measured on driver's side.
    Joe

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"