C3 (72) Wire harnes wrapping

[Rob C.]

Hi again,
Couldsome one tell me what they used to wrap the front harnes. It looks like electrical tape but it is not sticky and it is about one inch wide.
If this is the case were do i find this stuf?
Thank you,
Rob

[Robert E.]

Re: C3 (72) Wire harnes wrapping

Rob, Is this what your looking for?

Robert
41801




Harness Tape

[Rob C.]

Re: C3 (72) Wire harnes wrapping

Not shore. Is it?
Rob

[Jack H.]

Re: C3 (72) Wire harnes wrapping

Most of the catalog houses stock & sell vinyl wiring harness wrap of the form without adhesive backing. About $10/roll. Some stock both sizes (3/4-inch wide and 1-1/4 inch wide).

[William C.]

Re: C3 (72) Wire harnes wrapping

Correct tape was 1.3 inch wide from 1969 model year up for most Corvette applications. .007 inch thick vinyl tape without adhesive. The harness was built on a fixture that controlled the dimensions and taped while on that fixture. At the end of a taped section, there will be a knot made from the tail end of the tape being tied off to hold it in place.