wire harness 1963 dash brace - NCRS Discussion Boards

wire harness 1963 dash brace

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ray C.
    Extremely Frequent Poster
    • June 30, 2001
    • 1132

    wire harness 1963 dash brace

    Does the under dash wire harness run above or below the support rod brace near the defrost duct?




    Ray Carney
    1961 Sateen Silver 270-HP
    1961 Fawn Beige 315-HP
  • Joe M.
    Very Frequent User
    • February 1, 2005
    • 589

    #2
    Re: wire harness 1963 dash brace

    Ray,
    Harness is above the brace on my car.
    joe

    Comment

    • Ray C.
      Extremely Frequent Poster
      • June 30, 2001
      • 1132

      #3
      Re: wire harness 1963 dash brace

      I thought it was, but wanted to make sure prior to mounting the dash unit.

      Thanks for you help!!

      Ray
      Ray Carney
      1961 Sateen Silver 270-HP
      1961 Fawn Beige 315-HP

      Comment

      • Stephen L.
        Extremely Frequent Poster
        • May 31, 1984
        • 3148

        #4
        Re: wire harness 1963 dash brace

        Isn't there supposed to be insulation glued to the firewall. There is on a '67. Can't vouch for a 63, but now would be the time to install it

        Comment

        • Ray C.
          Extremely Frequent Poster
          • June 30, 2001
          • 1132

          #5
          Re: wire harness 1963 dash brace

          Hi!
          Steve

          Yes there is and it has a black asphalt type covering and it is installed just below the view you are looking at.

          Thanks for asking!

          Ray
          Ray Carney
          1961 Sateen Silver 270-HP
          1961 Fawn Beige 315-HP

          Comment

          • Stephen L.
            Extremely Frequent Poster
            • May 31, 1984
            • 3148

            #6
            Re: wire harness 1963 dash brace

            Ray, the stuff I am talking about is "glued on" insulation above the black stuff. It has no "backing" just insulation. Its right under the windshield opening and above the heater housing. maybe it was used in later years. Mine is a '67.

            Comment

            • John H.
              Beyond Control Poster
              • December 1, 1997
              • 16513

              #7
              Re: wire harness 1963 dash brace

              The upper cowl plenum insulation looks like this (heater box was a test fit - main dash mat/insulator not installed yet).




              Comment

              Working...

              Debug Information

              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"