1967 door panel screws

[Richard B.]

I was reading the manual it calls for screw that is on the out side of the panel about a 1/3 way down. The screw is a Philips heed with a detached beveled washer. But on my fathers original 67 convertible the screw is a big pan heed Phillips screw. I know what the manual calls for is what is judged, but is the one in the vert original. Also does anyone have a close up picture of it. Here is the one in question

[Richard B.]

Re: 1967 door panel screws *NM*

[Mike M.]

Re: 1967 door panel screws

Too blurry to tell about the screw, it could be.
The beveled washer should be barely visible.
The pictured washer is not correct for the door panel, looks the one that belongs on the halo panel of a coupe.
Follow the Judging Guide.
H. a. N. D.

[Nick Culkowski]

Re: 1967 door panel screws

Real ones I have seen look like this.