67 radiator support - NCRS Discussion Boards

67 radiator support

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Randy R.
    Very Frequent User
    • March 1, 1983
    • 477

    67 radiator support

    How straight,level and plumb is the radiator support? The bottom bar on my radiator support seems to have a 1/4 in bow in it. The left side top corner seems to be pushed back about 1/4 in. The car has been in a few fender benders over the years. Are these meausurements within factory tolerances? If not I will try to straighten it or replace it. Who reproduces them?
  • Stephen L.
    Extremely Frequent Poster
    • May 31, 1984
    • 3148

    #2
    Re: 67 radiator support

    A new one would be straight/flat in these areas. Sounds like you've got some damage. I'd try straightening before purchase... nothing to lose.

    Comment

    • Patrick T.
      Expired
      • September 30, 1999
      • 1286

      #3
      Re: 67 radiator support

      Mine was bent in an accident long time ago. The body shop must have tried to straighten it out, but it will never fit right again. I just bought a new support from www.dewitts.com for $278 on line. PT




      Attached Files

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"