C3 Do'se GM sill make controle arm bushings

[Rob C.]

Counld Some one tell me if GM still makes controle armbushings, sleeves, bolt and shims. Allso do they make the rubber bushings by the front of the diferential. I did not make the parts department before they closed.
Thank You,
Rob

[Joe L.]

Re: C3 Do'se GM sill make controle arm bushings

Rob-----

I doubt that GM ever actually manufactured these parts, but the parts are still available from GM. The parts, with current GM list prices and number required PER CAR, are shown below. Keep in mind that some of these parts are available only in unit quantities which may exceed what you need. So, if your dealer doesn't stock them, you'll likely have to purchase the entire unit quantity. One way around this is to buy the parts from a Corvette supplier like Dr. Rebuild, Paragon, etc.

trailing arm bushings (4 required)---GM #3743857----$12.14/each

bushing plate (4 required)-----------GM #3820418------1.75/each

retainer (tube) (2 required)---------GM #3819806------6.53/each

bolt (2 required)---------------------GM #458984------10.03/each

slotted nut (2 required)--------------GM #3774712------4.09/each

dif bracket UPPER cushion (1 required)-GM #3788637------12.85/each

dif bracket LOWER cushion (1 required)-GM #3795333------11.90/each

[Rob C.]

Thank you Joe I will call tomorrow *NM*