RE: 65 vent window for coupe - NCRS Discussion Boards

RE: 65 vent window for coupe

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • harry nye

    RE: 65 vent window for coupe

    Hello to all. I figure this would be the best place to find this part. I'm sure anyone out there who has a midyear corvette has had the problem of the hinge breaking off the vent window where the glass is attached. My ask is for help, does anyone have a vent window frame in real nice condition or NOS with a perfect untouched hinge without the glass for a 65 coupe driver side. This frame is the one that holds the glass and winds out when turned. Your Help is much appreciated. Thanks Harry
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: RE: 65 vent window for coupe

    the frame and the hinge are stainless. remove the glass, drill thru the frame where the two spot weld scars reside. put some stainless wire in your mig and weld them back together thru the two holes you drilled in the frame. get your Baldor buffer out and polish the whole deal. takes about an hour and it'll be perfect. mike

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"