Tweet
Any first hand recommendations on chicago area engine rebuilder machine shops?
Thanks
JimV
Thanks
JimV
-
-
Re: Chicago area engine builder needed....
We can do the usual things rings bearings valves. How much more do you need? -
Re: Chicago area engine builder needed....
Block shake and bake clean
block bore and hone for moly rings
crank ground/polished
magnaflux rods, heads, block
recondition rods (round and straight)
three angle valve job
Press rod pins
balance reciprocating assy
usual engine rebuild stuff....Comment
-
Re: Chicago area engine builder needed....
Jim, where in the Chicago area are you located? If in northern suburbs I can make a couple of recommendations.
GarryComment
-
Re: Chicago area engine builder needed....
Hey Gary, I am in the western burbs but will consider all builders in the metro area.
Thanks
JimVComment
-
Re: Chicago area engine builder needed....
There is a guy in Libertyville that knows what he doing with the restoration rebuilding of corvette engines. Is that too far?
GarryComment
-
Re: Chicago area engine builder needed....
Gary, Nope...not too far....Please pass on his info..
ThanksComment
-
Re: Chicago area engine builder needed....
Jim, check your private email.
GarryComment
-
Re: Chicago area engine builder needed....
Garry..what guy in Libertyville?Comment
-
Re: Chicago area engine builder needed....
Joe,
I sent Jim a private email so that I don't list names of businesses on here and possibly be told that I should'nt. I know that you know some people in the area, do you have some recommendations for Jim.
GarryComment
-
Re: Chicago area engine builder needed....
Garry..I have a brother in law that lives in Libertyville that has a major car collection. I thought he might be interested in the guy you are referring to.
Personnaly I don't object to recommendations on board..without them most people would not know where to start.
Maybe you can e-mail the guys name.
Many thanks,
JoeComment
Comment