C3 Printed Circuit Replacement - NCRS Discussion Boards

C3 Printed Circuit Replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scott W.
    Infrequent User
    • August 31, 1992
    • 9

    C3 Printed Circuit Replacement

    I'm replacing the printed circuit on the speedo/tach cluster of my '82 and have hit a snag. The attachments at the tachometer have me stumped. Does anyone have an idea how the printed circuit is detached from the 3 connectors?
  • Scott W.
    Infrequent User
    • August 31, 1992
    • 9

    #2
    Re: C3 Printed Circuit Replacement

    Well, figured this one out myself. I'll post the solution for the archives or in case anyone else is interested. On the speedo/tach cluster the six hex head screws are real. I got off track assuming they were molded in like on the center console. Remove them, remove the bezel, then remove three screws retaining tach. Carefully pry out tach and you are there. The rest is easy.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"