C4 Driver's sport seat lumbar switch bezel - NCRS Discussion Boards

C4 Driver's sport seat lumbar switch bezel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dick Kindl

    C4 Driver's sport seat lumbar switch bezel

    I have to replace a broken bezel on the left side driver's sport seat switch assembly of my 90 ZR1. I took the two screws out, lifted out the switch assembly which has a broken bezel. The two switches each have 4 wires on each switch. I want to know if they are soldered on or pull off......and if not, do I have to remove the seat or what to get the wires and switch separated to remove the broken bezel and then install the new replacement bezel??? HELP!!!! Thanx in advance for any help. Dick #31008
  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: C4 Driver's sport seat lumbar switch bezel

    My parts book only goes to '89, but they were all built with the wiring attached to the switch with jumpers out to the other wiring harnesses, in other words, they do not disconnect at the switch, but further downstream.
    Bill Clupper #618

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"