Proper C1 trunk adhesice application - NCRS Discussion Boards

Proper C1 trunk adhesice application

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John A. Salce (#21388)

    Proper C1 trunk adhesice application

    I am looking for a couple of photos that demonstrate the proper (or acceptable) application of the yellow adhesive used for attaching the jack instruction sheet and the three foam pads onto the trunk board. I have heard that it was applied very liberally and with a wide brush. Please email me at salcej@comcast.net. I am up against a time deadline for this so if you can help me quickly it will be MOST appreciated! Thank you all for the great information exchanged on this website!!
  • Jerry C.
    Very Frequent User
    • November 1, 1995
    • 741

    #2
    Re: Proper C1 trunk adhesice application

    Just brush it on about 1" to 1.5" larger than the label itself and you will be OK. Make it real sloppy looking.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"