Glass install on a 1963 SWC - NCRS Discussion Boards

Glass install on a 1963 SWC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ray C.
    Extremely Frequent Poster
    • June 30, 2001
    • 1132

    Glass install on a 1963 SWC

    Hi!

    I hope to install the windshield-rear windows on my 63 SWC project this weekend. I have installed the rear stainless molding clips and there were marks to locate the clips.

    I have posted this question previously and received some very good information, but I am still a little confused on the windshield clips. Are there only two types of clips for the stainless trim? (Same clip just wider slot to mount on the birdcage) Is the side windshield stainless trim held on by the upper and lower horizontal stainless trim and the screws in to the vertical section of the windshield birdcage.

    Any advise or descriptions of problems others have had installing the glass on a 63 SWC is welcome!

    Thanks for all the help the members have provided! I am coming down the home stretch with this project and hope to see you on the highway soon.

    Ray Carney #36314
    Ray Carney
    1961 Sateen Silver 270-HP
    1961 Fawn Beige 315-HP
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"