torque for cylinder heads

[BIGARDA]

I NEED THE TORQUE FOR THE CYLINDER HEADS OF MY VETTE´79, AND THE ADJUST FOR THE VALVES, THANKS.

[BIGARDA]

Re: torque for cylinder heads

IS A L48

[Joe Lucia (12484)]

Re: torque for cylinder heads

BIGARDA-----

The torque for the cylinder heads is 65 lb/ft for all bolts. The valve adjustment procedure will be found in your 1979 Corvette Shop Manual. If you don't have one, you need to get one. They're available from the NCRS bookstore for a modest cost.

[BIGARDA]

Re: torque for cylinder heads

I HAVE IT. THANKS

[Kent Keech (6201)]

All caps is shouting

Please turn your caps lock off. It makes for much easier reading. Posting with all caps is like shouting in internet protocol.
Thanks, Kent #6210