C-2 front end shims

[Dale S.]

I drove my 67 last week and when I got back I noticed that the front end shims were missing from the passenger side front. I looked at the 3 other positions that have shims and all of them had 3 thicker and one thinner shim in each position. I went to a front end shop and got 3 thick shims and one thin shim. I had to loosen the nut slightly to get them in and then tighted it up. Other than having it re-alighned is there anything else I should do or watch for. Thank you dale

[lyndon sharpton]

Re: C-2 front end shims

make sure that the bolt is going through the frame an not just turing an getting tight. some times they will back out. just have your aligment guy check when you get the front done

[Dale S.]

Re: C-2 front end shims

It is tight Thank you . Dale