67 inner quarter panel screws *Mike Hanson* - NCRS Discussion Boards

67 inner quarter panel screws *Mike Hanson*

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Donald W.
    Expired
    • August 12, 2013
    • 190

    67 inner quarter panel screws *Mike Hanson*

    Mike,

    I posted this question on an earlier thread. Joe Lucia could not find a part # or description of the upper 2- mounting screws for the inner quarter panels on a convertible. The hex head screw for the bottom, that i have is the correct one. Would the chrome washer backed phillips head screws used for the radio side panels be correct or close?.

    Thanks for your help,

    Don
  • Michael H.
    Expired
    • January 29, 2008
    • 7477

    #2
    Re: 67 inner quarter panel screws *Mike Hanson*

    Don,

    Here's a scan of a screw that I had saved and labeled "hinge cover screws". I don't remember what year these are from but could be that all 63-67 were the same.




    Comment

    • Donald W.
      Expired
      • August 12, 2013
      • 190

      #3
      Thanks Mike *NM*

      Comment

      • Michael H.
        Expired
        • January 29, 2008
        • 7477

        #4
        Re: 67 inner quarter panel screws *Mike Hanson*

        Forgot to mention. It's probably difficult to tell in the scan but these were originally chrome of poor quality.

        Also, I know I've seen radio side panel screws in the hinge cover locations over the years but according to records and the AIM, they're not supposed to be there. I don't know of any other location on the car that these were used.

        Comment

        • Peter L.
          Extremely Frequent Poster
          • May 31, 1983
          • 1930

          #5
          Re: 67 inner quarter panel screws *Mike Hanson*

          Don - Michael's picture shows the screw (67 AIM p/n 9422442) I'd expect to see attaching the upper end of the panel behind the door on a convertible. The radio side panel screw is p/n 3777486 according to the 67 AIM. Pete

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"