window regulator rebuild - NCRS Discussion Boards

window regulator rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom Sarno

    window regulator rebuild

    Would anyone be able to explain the proper prceedure to replace the large rivit that is in the center of the spring on a c-3 power window regulator? I bought a new one and it had no directions.

    Tom
  • Scott Marzahl

    #2
    Re: window regulator rebuild

    The proper way..hmm. It is just riveted in place and you will probably need to use a pneumatic air hammer with a riveting head since this is a pretty good size rivet to buck. However, I have seen them replaced by either Tig or Mig welding them in place too.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"