66 big block ride height - NCRS Discussion Boards

66 big block ride height

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerry Weidner

    66 big block ride height

    I have a 66 427 w/o air that has the F41 option, can anyone measure the ride height from the center of the front front fender wheel opening to the ground. I have the engine out so I cannot measure per the AIM. It was sitting about an 1-1/2 lower in the front than the back with the engine in. I want to adjust the front end height before I put the engine back in. The rear end sits at a nice height about 25-1/2 " form the center of the wheel well opening. I know the F41 springs will make it sit lower was just curious how much lower it should sit.

    Jerry
  • Don 42616

    #2
    Re: 66 big block ride height

    Jerry, 247/8" My 66 427 has replaced shocks. Mabe not valid for you. Don

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"