Getting rear rotor off a 65 c2? - NCRS Discussion Boards

Getting rear rotor off a 65 c2?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jim #42767

    Getting rear rotor off a 65 c2?

    Is there a trick to getting the rear rotors off a 65 c2? Caliper is off, no rivet holding it on, but it just wont move.
  • lyndon sharpton

    #2
    Re: Getting rear rotor off a 65 c2?

    make sure you have the rivets out, check your parking brake. you might need to tap it with a rubber hammer.

    Comment

    • Gary S.
      Extremely Frequent Poster
      • July 31, 1992
      • 1628

      #3
      Re: Getting rear rotor off a 65 c2?

      As Lyndon says, make sure that your parking brake mechanism is completely backed off. It will hold the rotor so fast that you swear the rivets are still on.

      Gary

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"