1961 headlight bezel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary A.
    Frequent User
    • June 1, 2001
    • 86

    #1

    1961 headlight bezel

    What is the best method for installing the chrome tips on the 1961 headlight bezels. thanks,Gary
  • Mike M.
    NCRS Past President
    • June 1, 1974
    • 8288

    #2
    Re: 1961 headlight bezel

    the GM tips come with a pair of studs as part of the casting. the studs need to be peened over to fasten tip to the headlite bezel. i took a chainsaw to a piece of white oak (4" x 4" x 10") and cut a groove ( approximating the configuration of the tip) in the oak. then placed the oak in the vice and peened the soft studs over with a ball peen hammer, using the oak as the dolly. good luck, mike

    Comment

    • Dennis A.
      Expired
      • May 1, 1999
      • 1010

      #3
      Re: 1961 headlight bezel

      Mike is correct...However a little JB bond in the front helps a lot. be sure to fit the rear were it joins the fender chrome strip. some are raised and with a little care the rear can be lowered to fit.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"