C1 Pittman arm ball stud - NCRS Discussion Boards

C1 Pittman arm ball stud

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe R.
    Very Frequent User
    • July 31, 1994
    • 287

    C1 Pittman arm ball stud

    Can anyone share with me the procedure for changing the ball stud on a 54 Pittman arm and 3rd arm? Couldn't find in the archives.

    Thanks in advance!

    Joe
  • Roy B.
    Expired
    • February 1, 1975
    • 7044

    #2
    Re: C1 Pittman arm ball stud

    You dont change them . get a good used ones.

    Comment

    • Gary Bishop

      #3
      Re: C1 Pittman arm ball stud

      A few years ago I bought a new ball from CC and took the arm to a machine shop. They heated and removed the old one, pressed in the new one, then, if I remember correctly, peaned it as the original was.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"