glass bead blasting question - NCRS Discussion Boards

glass bead blasting question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kyle Zevena

    glass bead blasting question

    I am glass bead blasting my spindles, T-Arms, and associated parts, and am wondering if I should tape off the machined surfaces? What is the recommended procedure when blasting items with machined surfaces?

    Any insight would be appreciated, as usual, thanks for all the help.

    cant wait to get back on the road....
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: glass bead blasting question

    Kyle-----

    Personally, I protect all machined surfaces. This would be especially important for spindles with bearing surfaces. I would never glass bead those surfaces.
    In Appreciation of John Hinckley

    Comment

    • Michael L.
      Expired
      • July 31, 2005
      • 562

      #3
      Re: glass bead blasting question

      Kyle, I'm with Joe, mask off machined surfaces.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"