63 headlight motor switch - NCRS Discussion Boards

63 headlight motor switch

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steve D.
    Expired
    • February 1, 2002
    • 990

    63 headlight motor switch

    The attached photo is of the wiring harness connector for the headlight motor switch. My switch has 3 loose leads, without a connector. Is there a matching male connector for the connector shown in the picture? Is it available at parts stores, or does it have to be ordered?
    Thanks.

    Steve




  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: 63 headlight motor switch

    Connects directly to three pins sticking out of the back of the switch.
    Bill Clupper #618

    Comment

    • Steve D.
      Expired
      • February 1, 2002
      • 990

      #3
      Re: 63 headlight motor switch

      Bill

      Thank you. If I had disconnected the pigtail from the switch before I asked the question, I would have seen that.

      Steve

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"