63_horn

[Steve D.]

As shown in the photo, the mounting bracket on this horn is in a different position than the bracket shown in the AIM drawing. Since the bracket is bradded onto the horn and is not easily removed, is there an alternative to looking for a different horn?. This was on the car when it was disassembled, and I didn't notice the brackect position until now.

Steve

[Bob R.]

Re: 63_horn

Do you have a 63 horn? Look for the part number. I believe the 63 horns are 455 and 456. The bracket you have is not correct for a 63. The 63 horns are hard to find, yours might have been replaced at some point in time.

[Chuck G.]

Re: 63_horn

That doesn't look like a 63 horn. They're bigger than the 64-up variety.

Look for the 455 and 456 stampings. Look for the dates too. Post what you find. Chuck

[Philip C.]

Not a 63 not a corvette *NM*