C3; length alternator belt - NCRS Discussion Boards

C3; length alternator belt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Erik S.
    Very Frequent User
    • January 1, 2005
    • 407

    C3; length alternator belt

    Hi All - during my weekend trip I broke my alternator belt and had to leave it on the highway. I have a 1968 BB (L71), no PS, no AC. What would be the correct length of this belt. Any recommendations where to get the correct belts?

    Thank you,
    Erik
  • Norm C.
    Expired
    • April 1, 1989
    • 227

    #2
    Re: C3; length alternator belt

    2 sources..... 1st get what ever it takes to get your Vette off the hiway ASAP, even if it means a flat bed tow........its a huge target out there!! 2. Quanta has the license for GM belts. Good Luck!!

    Comment

    • Erik S.
      Very Frequent User
      • January 1, 2005
      • 407

      #3
      Re: C3; length alternator belt

      This one looks about right:

      http://www.corvette-paragon.com/cata...7-F13A244C530A

      Am I right and would this be correct for judging purposes? If not, again recommendations are appreciated.

      Erik

      (ps Norm - I just left the belt hahaha - obviously I will not move 2 inches without taking the vette)

      Comment

      • Norm C.
        Expired
        • April 1, 1989
        • 227

        #4
        Re: C3; length alternator belt

        sorry Erik,,,for mis-reading..... a friend of mine did just that with a later Vette, on an inter-state for just less than 2hrs & it was gone, never recovered!!!
        I'm the same way as you....they'd find bones from starvation before I'd leave it un-attended!!! PS... just ordered belts for mine on Friday from Quanta and rec'd confirmation they were shipped today..... seems Quanta has improved its delivery times!

        Comment

        • Wayne P.
          Extremely Frequent Poster
          • August 31, 1975
          • 1025

          #5
          Re: C3; length alternator belt

          I don't know about this belt, but GM still has a lot of belts available for C3. I just bought a complete set except for one which was repro.

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"