i was told when i went to GM carb tech classes - NCRS Discussion Boards

i was told when i went to GM carb tech classes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    i was told when i went to GM carb tech classes

    the reason for the thread damage was the fact that the threads were the lowest part in the carb and the water got to them. that is why as i explained above they changed the location of the sealing washer to prevent the water from getting to the threads. i have seen if the threaded areas of the float bowl were damaged the area inside past the needle/seat was OK
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"