Obtaining Copies of Articles

[Richard R. Goodwin]

This is my first time on the web site. I found an article in the archives that I would like to obtain. What is the procedure? I am a new member of the Society, MAP chapter, and am just getting started restoring my '65, which I bought new, and am gathering information.

P.S. I worked under E. N. Cole, as an engineer for Chevy, during the Corvette developement.

Dick Goodwin

[Robert C.]

Re: Obtaining Copies of Articles

Dick, As of this year, I don't believe the NCRS is selling past articles. Used to be able to get them for $1 per page. Unless you can get all the past Restorer mags. or know someone to borrow from, you're out of luck. Sorry, Bob Cook, Welcome to the organization!


Texas Chapter NCRS

[Christopher R.]

Re: Obtaining Copies of Articles

NCRS will sell you a CD-ROM that has all the articles from the "Restorer." Searchable too.

[John W.]

Re: Obtaining Copies of Articles

Richard,

There are two ways to get past articles. The best is probably "The Restorer Magazine on CD" available here at the NCRS Store. See link below, or the NCRS Store Link on any page. There is also the "NCRS Restoration & Maintenance Encyclopedias 1953 - 1977" These are also available at the NCRS Store on Page 7. This is a collection of articles grouped by topic and model years. You can also purchase the entire collection.

The best deal is the CD collection because of it's search capability.

John


NCRS Store "Restorer CD"

[Loren L.]

Re: Obtaining Copies of Articles

Dick: I have some extra magazines - what article(s) are you looking for? Contact me direct and we'll work it out. Were you with Cole when Sanders, Rosenberger, etc were there or what time period? Be careful, there still thousands of questions to be asked of folks like you.