69 - center carb choke settings - NCRS Discussion Boards

69 - center carb choke settings

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John A.
    Expired
    • August 31, 2002
    • 172

    69 - center carb choke settings

    Hey guys...
    Anyone have a good reference on how to set the choke on one of these two barrels.... I have the linkage and sping, but would like some advice on setting the butterfly opening and the idel cam...

    Thanks!
  • Dick W.
    Former NCRS Director Region IV
    • June 30, 1985
    • 10483

    #2
    Re: 69 - center carb choke settings

    I Chevrolet service manual has very good instructions. For a starter, on a cold engine, I would set the choke butterfly closed with very little tension. Final adjustment will be a trial and error process. The fast idle cam will have to be adjusted by trial and error also.
    Dick Whittington

    Comment

    • John A.
      Expired
      • August 31, 2002
      • 172

      #3

      Comment

      • John H.
        Beyond Control Poster
        • December 1, 1997
        • 16513

        #4
        Re: 69 - center carb choke settings

        John -

        The 6M section of the Chassis Service Manual shows the adjustment of the remote choke rod, and the 6M section of the Chassis Overhaul Manual details the adjustment of the fast idle and choke pull-off systems. Nobody with a 40-year-old Corvette should be without both books; no place you take it to have work done will have either one.

        Comment

        • John A.
          Expired
          • August 31, 2002
          • 172

          #5
          Re: 69 - center carb choke settings

          I just found my Service manual... and you are correct!

          Thanks

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"