C2 headlamp gear reassemble - NCRS Discussion Boards

C2 headlamp gear reassemble

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gus Gates

    C2 headlamp gear reassemble

    My C2 headlamps stop working and I found out the headlamp motor drive gear was worn. The other gear appears fine. There is a nylon washer with two slots in it. Does it matter how this is reassembled? Thanks
  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: C2 headlamp gear reassemble

    If it has not already been done on your assembly, the driven gear only travels 180 degrees during activation, so reversing it to use the unused gear teeth is a perfectly acceptable practice to renew the function.
    Bill Clupper #618

    Comment

    • Albert P.
      Expired
      • April 1, 2006
      • 205

      #3
      Re: C2 headlamp gear reassemble

      The nylon washer goes on the gear side that faces the motor assembly.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"