I have been looking back through the archives to find any reference to this subject with limited luck. I have a copy of the Quanta bulletin #24 that shows some questionable marks on 58 and 61 C1s but no reference to 62. Some of the past posts refer to the thought that inspection marks would not be seen due to blackout, but in the same thought, blackout was very inconsistant and I think that in some cases, inspection marks would be noticable on top surfaces and some side areas. I remember somewhere reading that the cases were unpainted but nothing on the insection marks. As always, any help would be appreciated.
thanks, Eric 31337
thanks, Eric 31337