63 340 HP exhaust shields

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom H.
    Extremely Frequent Poster
    • December 1, 1993
    • 3440

    #1

    63 340 HP exhaust shields

    Should a 63 340 HP ( Jan built car ) have the exhaust shields on the head pipes under the floorboards? Some of the catalogs I see don't list them for the 340 HP. I have an original set, but don't want to install them if incorrect. Thanks !
    Tom Hendricks
    Proud Member NCRS #23758
    NCM Founding Member # 1143
    Corvette Department Manager and
    Specialist for 27 years at BUDS Chevrolet.
  • William C.
    NCRS Past President
    • June 1, 1975
    • 6037

    #2
    Re: 63 340 HP exhaust shields

    Assembly Manual states "Part number 3828285,LH and 3828286 RH shield assy assenbled same as regular production. A good AIM is a necessary tool to have.
    Bill Clupper #618

    Comment

    • John D.
      Extremely Frequent Poster
      • December 1, 1979
      • 5507

      #3
      Re: 63 340 HP exhaust shields

      Tom, I used to own a CA car 340 HP RE engine car that was bascially all original except for a fake fuel unit and a red paint job and it had the exhaust heat shields on. The judging manual refers to this also as well as what Clupper told you. John

      Comment

      • Tom H.
        Extremely Frequent Poster
        • December 1, 1993
        • 3440

        #4
        Re: 63 340 HP exhaust shields

        Thanks John:

        I read the JM and just didn't know for sure if all cars had it or not. I was confident my car was correct in having them ( since I bought an original set ) but a catalog I was looking at didn't include them in the 340 HP section. Thanks for both of your replies, I appreciate it. I'll be installing the shields now !!
        Tom Hendricks
        Proud Member NCRS #23758
        NCM Founding Member # 1143
        Corvette Department Manager and
        Specialist for 27 years at BUDS Chevrolet.

        Comment

        • Ray C.
          Expired
          • July 1, 2001
          • 1124

          #5
          Re: 63 340 HP exhaust shields

          Is there a good aftermarket source for the correct heat shields.

          Thanks Ray

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"